Water-Based Vs. Oil-Based Polyurethane Floor Finish

 

Water-based polyurethanes provide a clear finish and have low odor. We can recoat them in two hour. If we start early enough in the day, we can apply the recommended four coats and you can sleep in the room that night.

Oil-based polyurethanes leave an amber glow and require fewer coats. But the five-hour wait between coats and 12-hour wait after the last coat will put a bedroom out of commission for a few days—and you’ll have to put up with a strong odor.

We’re installing tongue-and-groove maple flooring in a newly remodeled master bedroom. They love the natural look of the maple but want a finish that will protect it. Is water-based or oil-based polyurethane better?

Both offer good protection; the biggest difference is in appearance. If you love the natural look of maple, apply a water-based (water-borne) polyurethane.  They’ll slightly accent the character of your wood without giving it the amber tint of an oil-based poly. (However, some woods, like the oak shown, cry out for that amber tint.) Water-based finishes dry fast— most within two hours—so you can apply several coats in a day and use the room that night. They have minimal odor.

But water-based polys have their tradeoffs. They cost four times as much as oil-based polys. They won’t give wood the rich glow that oil-based polys impart; some even consider them cold looking.

Most water-based polys contain only 30 to 35 percent solids, compared with the 45 to 50 percent solids in oil-based products. Since these solids create the protective finish, you need to apply four coats, as opposed to two or three. And you may need to apply additional coats every two years or so.

There’s debate over which finish is harder, but some experts maintain that hardness isn’t necessarily a good attribute of a floor finish. You want a finish that will flex along with the floor. And a super-hard finish shows scratches more readily.

You’ll prolong the protective life of any finish by eliminating its No. 1 enemies: dirt and grit. Sweep or vacuum the floor often and put throw rugs in high-traffic areas.

 

 

“The touch that makes things New"
 
Established 1988 

 "Our mission is to offer our customers Quality at Affordable Rates." 

 Discounts for builders, contractors & investor's 

 
Please call for a free estimate between the hours of 9am to 6pm Monday - Saturday  
 
866-890-9292   
 
Sand & 3 Coats $1.50 Per Sq. Ft.