Sand & refinish 3 coats - $2 Sq. Ft. (oil base poly)  $850.00 minimum (2 coats of poly)

Sand & refinish 3 coats - $2.25 Sq. Ft. (water base poly) $950.00 minimum

Sand & refinish steps - $35.00 per step

Sand & stain & refinish steps - $45.00 per step

For Pre-Finished & Parquet Floors add an additional $.50 Sq. Ft. 

Screen & Coat $1.00 Sq. Ft.  $650.00 minimum (1 coat oil base of poly or 2 coats of water base poly) - (please note a screen & coat will only remove minor surface nicks & scratches in your floor's finish, without sanding away any wood)

Installation unfinished - $1.50 Sq. Ft. (flooring not included) $650.00 minimum

Installation glue down - $2.50 Sq. Ft. (flooring not included) $650.00 minimum

Replace damaged boards - $45.00 per board or $10.00 Sq. Ft. (wood included)

Rip out carpets $100.00 per room

Staining:

**Oil base stain jobs we apply 1 coat of stain & 2 coats of oil base poly**

**Water base stain jobs we apply 1 coat of stain & 3 coats of water base poly**

Hamptons Pricing - Add An Additional .50 Sq.ft  $950 minimum

Queens pricing- add an additional .50cent per sqft  $950.00 minimum 

Sand & Refinish 3 coats using  Bona Traffic Water Base Polyurethane  The

Moisture Cure:

Sand & Refinish 2 coats using Moisture Cure Polyurethane 

The price is $1.75 sqft + the cost of polyurethane (cost is approx $60 per gal.) 

Payment Policy

Venmo - Cash -  Checks Zelle

1/2 at start of job 1/2 upon completion 

**Final price of job will be based on actual square footage**  

IF AN ADDITIONAL COAT OF POLY IS NEEDED TO ACHIEVE THE NECESSARY LEVEL OF APPEARANCE THE COST WILL BE AN ADDITIONAL .75 CENTS SQFT  - OR A $150.00 MINIMUM CHARGE WHICH EVER IS GREATER